A Volvo V70 2.0 D3 150hp (2011 ->) makes about 180 hp and 380 Nm with Stage 1 software, compared with 150 hp and 350 Nm from the factory. That is 30 hp and 30 Nm extra.

This is a diesel engine with a displacement of 1,984 cc and engine code D5204T2. The engine is controlled by the Denso 279700-9163, Denso MB279700-9621, Denso SH72546 and Denso MB279700-96xx. The software file can be written with tools such as Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox, CMD CMDFlash and 3 more.

Besides Stage 1, the following options are available for this vehicle: Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, DPF OFF and Vmax.

Frequently asked questions

How much power and torque does a Volvo V70 2.0 D3 150hp gain with Stage 1?

About 30 hp and 30 Nm: from 150 hp / 350 Nm to roughly 180 hp / 380 Nm. The exact gain depends on engine condition and fuel quality.

Which ECU does a Volvo V70 2.0 D3 150hp use?

Denso 279700-9163, Denso MB279700-9621, Denso SH72546 and Denso MB279700-96xx.

Which tools can read a Volvo V70 2.0 D3 150hp?

Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox, CMD CMDFlash, MagicMotorsport Flex, Dimsport New Genius and Dimsport New Trasdata.

Which extra options are available for a Volvo V70 2.0 D3 150hp?

Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, DPF OFF and Vmax.

Figures are indicative and vehicle specific. Check the regulations that apply in your country before modifying engine software.