A Land Rover Evoque 2.2 SD4 190hp (2011 – 2015) makes about 215 hp and 470 Nm with Stage 1 software, compared with 190 hp and 420 Nm from the factory. That is 25 hp and 50 Nm extra.

This is a diesel engine with a displacement of 2,179 cc and engine code 224DT. The engine is controlled by the Bosch EDC17CP42, Bosch EDC17C46 and Bosch MEDC17.9, the gearbox by the ZF 6HP. The software file can be written with tools such as Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox, CMD CMDFlash and 4 more.

Besides Stage 1, the following options are available for this vehicle: Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, Pop & Bang Crackle map, DPF OFF and Vmax.

Frequently asked questions

How much power and torque does a Land Rover Evoque 2.2 SD4 190hp gain with Stage 1?

About 25 hp and 50 Nm: from 190 hp / 420 Nm to roughly 215 hp / 470 Nm. The exact gain depends on engine condition and fuel quality.

Which ECU does a Land Rover Evoque 2.2 SD4 190hp use?

Bosch EDC17CP42, Bosch EDC17C46 and Bosch MEDC17.9 (engine); ZF 6HP (gearbox).

Which tools can read a Land Rover Evoque 2.2 SD4 190hp?

Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox, CMD CMDFlash, MagicMotorsport Flex, Dimsport New Genius, Dimsport New Trasdata and PCM-Flash.

Which extra options are available for a Land Rover Evoque 2.2 SD4 190hp?

Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, Pop & Bang Crackle map, DPF OFF and Vmax.

Figures are indicative and vehicle specific. Check the regulations that apply in your country before modifying engine software.