A Audi A6 2.0 TDI 190hp (C7 – 2011 – 2018) makes about 225 hp and 470 Nm with Stage 1 software, compared with 190 hp and 400 Nm from the factory. That is 35 hp and 70 Nm extra.

This is a diesel engine with a displacement of 1,968 cc and engine code CNHA. The engine is controlled by the Bosch EDC17C64, Bosch MED17.1 and Bosch EDC17C74, the gearbox by the Temic DL382, Temic DL501 Gen1 and Temic DL501 Gen2. The software file can be written with tools such as Alientech K-TAG, Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox and 7 more.

Besides Stage 1, the following options are available for this vehicle: Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, DPF OFF and Vmax.

Frequently asked questions

How much power and torque does a Audi A6 2.0 TDI 190hp gain with Stage 1?

About 35 hp and 70 Nm: from 190 hp / 400 Nm to roughly 225 hp / 470 Nm. The exact gain depends on engine condition and fuel quality.

Which ECU does a Audi A6 2.0 TDI 190hp use?

Bosch EDC17C64, Bosch MED17.1 and Bosch EDC17C74 (engine); Temic DL382, Temic DL501 Gen1 and Temic DL501 Gen2 (gearbox).

Which tools can read a Audi A6 2.0 TDI 190hp?

Alientech K-TAG, Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox, CMD CMDFlash, MagicMotorsport Flex, Foxflash, Dimsport New Genius, Dimsport New Trasdata, PCM-Flash and bFlash.

Which extra options are available for a Audi A6 2.0 TDI 190hp?

Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, DPF OFF and Vmax.

Figures are indicative and vehicle specific. Check the regulations that apply in your country before modifying engine software.