A Audi A5 3.0 TDI 240hp (MK1 – 2007 – 2011) makes about 300 hp and 625 Nm with Stage 1 software, compared with 240 hp and 500 Nm from the factory. That is 60 hp and 125 Nm extra.

This is a diesel engine with a displacement of 2,967 cc and engine code CAPA. The engine is controlled by the Bosch EDC17CP04 and Bosch EDC17CP14, the gearbox by the Temic DL501 Gen1 and ZF AL651. The software file can be written with tools such as Alientech K-TAG, Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox and 6 more.

Besides Stage 1, the following options are available for this vehicle: Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, DPF OFF and Vmax.

Frequently asked questions

How much power and torque does a Audi A5 3.0 TDI 240hp gain with Stage 1?

About 60 hp and 125 Nm: from 240 hp / 500 Nm to roughly 300 hp / 625 Nm. The exact gain depends on engine condition and fuel quality.

Which ECU does a Audi A5 3.0 TDI 240hp use?

Bosch EDC17CP04 and Bosch EDC17CP14 (engine); Temic DL501 Gen1 and ZF AL651 (gearbox).

Which tools can read a Audi A5 3.0 TDI 240hp?

Alientech K-TAG, Alientech KESS3, Alientech KESSv2, Autotuner, ByteShooter Toolbox, CMD CMDFlash, MagicMotorsport Flex, Dimsport New Genius, Dimsport New Trasdata, PCM-Flash and bFlash.

Which extra options are available for a Audi A5 3.0 TDI 240hp?

Adblue, EGR OFF, DTC Removal, START/STOP OFF, FLAPS, DPF OFF and Vmax.

Figures are indicative and vehicle specific. Check the regulations that apply in your country before modifying engine software.